Spot-On DLD700R Digital Laser Receiver 700m w/Staff Clamp (for all Red Rotary Lasers) - (Discontinued)
|
|
| Y.Accessories |
|
| Price: |
£149.95 excl VAT
£179.94 incl VAT |
|
|
| Delivery: |
FREE - UK Mainland |
|
|
| Availability: |
Sorry! Item discontinued. Suggest FRD800R as an alternative. |
|
Special Spot-On DLD700R Digital Laser Receiver 700m w/Staff Clamp with LCD digital indication in millimetres providing an even greater level of precision when locating the laser beam.
Compatible with most rotary laser levels with a red diode.
Measures the difference between the laserplane and the "0" zero level datum shown on the LCD in mm, allowing you to easily see the remaining height difference until the level position is reached.
Detecting range: 700m diameter
Detecting sensor range: 125mm
Readable sensor range: ±50mm
Accuracy sensitivity: 1mm high/2mm normal/5mm medium/10mm low
Special Features:
■ All-round rubber edging
■ IP66 protection
■ Magnetic top surface
■ Front and back LCD with backlight
■ LED 'traffic light' UP/DOWN indication
■ Zero-set function
■ Horizontal and vertical level vials
Compatible with all red beam rotary lasers in our Spot-On/Fukuda rotary laser range and most other well-known brand names.
Supplied complete with two 1.5v AA alkaline batteries.
DLD700MM Receiver - Zero Set:
The DLD700MM Receiver has an unique function - Zero set.
Please click here for the Zero set instructions.
DLD700MM Receiver - Applications:
The DLD700MM Receiver is a precision instrument for digitally displaying the variation from datum of the rotary laser beam.
However there is a limitation of only ±50mm height variation displayed.
This limits the measurements of horizontal surfaces at a short range, eg flooring, driveways, drainage and brickwork when the levelling range is within ±50mm.
It is also recommended for overhead lighting, suspended ceilings, ducting and pipework, etc.
Important:
Please note that this is a rotary laser receiver and will not work with cross & multi line lasers!
LLS Laser Levelling Staff - Alternative:
The LLS Laser Levelling Staff with a Receiver, (as included with every Spot-On/Fukuda Rotary Laser Set) already provides a direct height variation reading of ±500mm from the zero datum.
This allows for use at much longer distances, albeit at ground level only, with the same 1mm accuracy.
The Laser Levelling Staff allows height differences to be measured directly without any calculation!
(For full details and instructions, please refer to the LLS pictures and the Accessories below). |
|
|
Technical Specification: Spot-On DLD700R Digital Laser Receiver 700m w/Staff Clamp (for all Red Rotary Lasers) - (Discontinued) |
|
|
Detecting range |
700m diameter (subject to ambient light conditions and laser range)
|
|
Detecting sensor range |
125mm
|
|
Readable display range |
±50mm
|
|
Height display |
mm (default), cm, ins, ft & %
|
|
Accuracy/sensitivity |
1mm high/2mm normal/5mm medium/10mm low
|
|
Horizontal & vertical level vial accuracy |
30" / 2mm/10m
|
|
Power supply |
2 AA 1.5v alkaline batteries (included)
|
|
Operating time |
24hrs (w/out backlight)
|
|
Protection |
1P66 rating
|
|
Spot-On Ref No |
DLD700MM |
|
|
 |
|
|
Spot-On DLD700R Digital Laser Receiver 700m w/Staff Clamp (for all Red Rotary Lasers) - (Discontinued)
from Laser Level's Online Shop |
|
|
|
|
 |
|
Guides
available in Acrobat PDF format.
