Spot-On Digital Green Laser Level 400mm 0.05° Magnetic w/backlight [Industrial Model]
|
|
| Digital Laser Levels |
|
| Price: |
£249.95 excl VAT
£299.94 incl VAT |
|
|
| Delivery: |
FREE - UK Mainland |
|
| Availability: |
IN STOCK - London |
|
| Buy Online: |
|
|
| Manufacturer: |
Spot-On |
|
New Spot-On Digital Green Laser Level with horizontal and vertical vials and a large LCD numeric screen with backlight for measuring inclinations, slopes and plane surfaces.
Plus, an integrated ultra bright green laser diode with the spot options to extend the working range of the level and the line option to project a line onto a flat surface, (eg wall or floor).
Inclination is indicated in degrees (°) or slope in percent (%), (0.1% = 1mm/m pitch, rise over run).
Precision horizontal & vertical resolution to 0.1° or 0.1%.
Acoustic 'beep' signal indicates the horizontal and vertical positions.
An alternate Zero (0°) mode, the 'Reference Level' can be set between 0° and 90°. This enables the set slope angle to be checked or repeated elsewhere. (Please refer to 'Zero Set Instructions' below).
On-site owner re-calibration to factory setting.
Heavy-duty aluminium alloy construction with ribbed sides for positive grip.
Milled measuring surface with full length magnetic base.
Incorporating acrylic block vials with extra graticule rings for quick slope settings of guttering and pipework for rainwater drainage. (as illustrated, the bubble set at the outer graticule rings indicates a 2% slope and the middle rings 1% approx)
The laser function recommended for interior use only.
Precision high-quality engineering from Spot-On.
Zero Set Instructions
How to set a required slope as the alternate Zero (0°), the 'Reference Level':
1. Switch ON and select % mode.
2. Raise the LH end of the level to the required angle. (calculate at 1.0% = 10mm/m)
3. Press the Calibration button once, to display CALC 1.
4. Press the Calibration button again, to display CALC 2.
5. Press the Calibration button finally, to set at the required angle.
6. Switch the laser to ON, select the Spot lens to project slope angle over a distance.
7. Alternatively, select the line lens to project a line onto a vertical surface.
8. Use the re-calibrate procedure on a level surface to return to factory setting (0.00°), the 'Absolute Level'.
|
|
Main Features: Spot-On Digital Green Laser Level 400mm 0.05° Magnetic w/backlight [Industrial Model] |
|
 |
Red anodised aluminium alloy box section extrusion with ribbed sides for positive grip.
|
|
|
|
Milled measuring surface with with full length magnetic base.
|
|
|
|
Integrated green laser diode with spot or line options to extend the working range of the level.
|
|
|
|
Large LC 15mm numeric display with backlight, slope angle and battery state indicator.
|
|
|
|
Tilt angle displayed in degrees (°) and slope (% = mm/m pitch, rise over run).
|
|
|
|
Acoustic 'beep' signal at horizontal and vertical levels.
|
|
|
|
Display can be read even when level is inverted for overhead measurements.
|
|
|
|
On-site owner re-calibration to factory setting.
|
|
|
|
Alternative zero reference can be set at any angle.
|
|
|
|
Auto shut-off to save power.
|
|
|
|
Data hold function.
|
|
|
|
Low power warning.
|
|
|
|
Horizontal and vertical vials.
|
|
|
|
Complete with battery, instructions and padded carry case. |
|
|
|
Technical Specification: Spot-On Digital Green Laser Level 400mm 0.05° Magnetic w/backlight [Industrial Model] |
|
|
Measuring Range |
4 x 90° (=360°)
|
|
Resolution |
0.05°
|
|
Angle accuracy |
0.1° at 0° & 90°
|
|
|
0.2° from 1° to 89°
|
|
Slope accuracy |
0.1% (= 1mm/m pitch)
|
|
Acoustic signal |
0° and 90°
|
|
Laser diode |
520nm <5mW Class 3R
|
|
Laser range |
Line >20m
|
|
|
Spot >100m
|
|
|
(Subject to ambient light conditions)
|
|
Laser offset |
Line 18mm (above base)
|
|
|
Spot 20mm (above base)
|
|
Vial accuracy |
0.5m/m = 0.028°
|
|
Operating temperature |
-10°C to +50°C
|
|
Power supply |
1 x 9v PP3 battery (included)
|
|
Duration |
20 hours (without laser)
|
|
|
10 hours (with laser)
|
|
Auto shut-off |
5 minutes
|
|
Protection |
IP54
|
|
Dimensions |
430 x 59 x 28mm
|
|
Weight |
0.48kg (includes battery)
|
|
Spot-On Part No |
SDLL40G |
|
| Price: |
|
£249.95 plus VAT (if applicable) |
|
|
| Buy Online: |
|
|
| Manufacturer: |
Spot-On |
|
|
|
 |
|
|
Spot-On Digital Green Laser Level 400mm 0.05° Magnetic w/backlight [Industrial Model]
from Laser Level's Online Shop |
|
|
|
|
 |
|
Guides
available in Acrobat PDF format.
![Spot-On Digital Green Laser Level 400mm 0.05° Magnetic w/backlight [Industrial Model] Digital Laser Levels](asps/uploads/big/1053-1.jpg)
![Spot-On Digital Green Laser Level 400mm 0.05° Magnetic w/backlight [Industrial Model] Digital Laser Levels](asps/uploads/big/1053-2.jpg)
![Spot-On Digital Green Laser Level 400mm 0.05° Magnetic w/backlight [Industrial Model] Digital Laser Levels](asps/uploads/big/1053-3.jpg)
![Spot-On Digital Green Laser Level 400mm 0.05° Magnetic w/backlight [Industrial Model] Digital Laser Levels](asps/uploads/big/1053-4.jpg)
![Spot-On Digital Green Laser Level 400mm 0.05° Magnetic w/backlight [Industrial Model] Digital Laser Levels](asps/uploads/big/1053-5.jpg)
![Spot-On Digital Green Laser Level 400mm 0.05° Magnetic w/backlight [Industrial Model] Digital Laser Levels](asps/uploads/big/1053-6.jpg)
