Fukuda FRD800R Digital Laser Receiver 800m w/Staff Clamp (for FRE102 & all Red Rotary Lasers)
|
|
| Laser Receivers |
|
| Price: |
£199.95 excl VAT
£239.94 incl VAT |
|
|
| Delivery: |
FREE - UK Mainland |
|
| Availability: |
IN STOCK - London |
|
| Buy Online: |
|
|
| Manufacturer: |
Fukuda Laser |
|
Special Fukuda FRD800R Digital Laser Receiver 600m w/Staff Clamp (for FRE102R red rotary laser level) with LCD digital indication in millimetres providing an even greater level of precision when locating the laser beam.
Also compatible as a replacement for most rotary laser models with a red diode.
Measures the difference between the laserplane and the "0" level datum shown on the LCD in mm, allowing you to easily see the remaining height distance until the level position is reached.
Compatible with all red beam rotary lasers in our Spot-On/Fukuda rotary laser range and most other well-known brand names.
Supplied complete with four 1.5v AA alkaline batteries.
Detecting range: 800m diameter
Detecting sensor range: 125mm
Readable sensor range: ±45mm
Accuracy sensitivity: Fine ±1mm fine / Course ±5mm medium/10mm
Special Features:
■ All-round rubber edging
■ IP55 protection
■ Magnetic top & side surfaces
■ Front and back LCD with backlight
■ LED 'trafic light' UP/DOWN indication
■ Zero-set function
■ Horizontal and vertical level vials
FRD800MM Applications:
The FRD800MM Receiver is a precision instrument for digitally displaying the variation from datum of the rotary laser beam.
However there is a limitation of only ±45mm height variation displayed.
This limits the measurements of horizontal surfaces at a short range, eg flooring, driveways, drainage and brickwork when the levelling range is within ±45mm.
It is also recommended for overhead lighting, suspended ceilings, ducting and pipework, etc.
Important:
Please note that this is a rotary laser receiver and will not work with cross & multi line lasers!
LLS Laser Levelling Staff - Alternative:
The LLS Laser Levelling Staff with a Receiver, (as included with every Spot-On Rotary Laser Set) already provides a direct height variation reading of ±500mm from datum.
This allows for use at much longer distances, albeit at ground level only, with the same accuracy. (Please refer to the LLS with Accessories below).
The Laser Levelling Staff allows height differences to be measured directly without any calculation! |
|
|
Technical Specification: Fukuda FRD800R Digital Laser Receiver 800m w/Staff Clamp (for FRE102 & all Red Rotary Lasers) |
|
|
Detecting range |
800m diameter (subject to ambient light conditions and laser range)
|
|
Detecting sensor range |
125mm
|
|
Readable display range |
±45mm
|
|
Height display |
mm (default), cm, ins, ins fraction & %
|
|
Accuracy/sensitivity |
1mm high/5mm medium/10mm low
|
|
Horizontal & vertical level vial accuracy |
30" / 2mm/10m
|
|
Power supply |
4 AA 1.5v alkaline batteries (included)
|
|
Operating time |
40hrs (w/out backlight)
|
|
Protection |
1P55 rating
|
|
Spot-On Ref No |
FRD800R |
|
|
 |
|
|
Fukuda FRD800R Digital Laser Receiver 800m w/Staff Clamp (for FRE102 & all Red Rotary Lasers)
from Laser Level's Online Shop |
|
|
|
|
 |
|
Guides
available in Acrobat PDF format.
