Fukuda KD500 Charger 5.6v 900mA
|
|
| Laser Power Supply |
|
Fukuda Charger for 240v UK mains or 110v on-site alternative power supply connection for:
Fukuda Rotary Laser Levels - FRE205, 302R, 2010WS
Spot-On Rotary Laser Levels - old SRL200R/300R. Also, new SRL205R/G, 208R/G, 210R & 210WS
Also, suitable for other rotary laser levels.
(Please refer to the Technical Specification below).
Important
Subject to stock availability, A 700mA Charger may be supplied instead of a 900mA Charger. This will work OK but will just take a little longer to charge a rotary laser.
If this charger does not match the required rotary laser level's specification, we suggest check with Amazon or eBay for a suitable alternative.
Instructions
1. This Power Supply Unit is intended especially for powering Fukuda and Spot-On Rotary Laser Levels only.
It can also be used for powering other rotary laser levels or charging rechargeable batteries, only if suitable.
2. If used to power other rotary laser levels, please remove all alkaline batteries from the rotary laser level before using the Power Supply Unit.
3. Please check the power output and jack plug size required to match the rotary laser level's specification.
|
|
|
Input |
110v-240v AC
|
|
|
50Hz-60Hz
|
|
Output |
5.6v DC
|
|
|
900mA
|
|
|
5.5mm x 2.1mm jack plug
|
|
Cable length |
1.7m
|
|
Fukuda Ref |
KD500-900 |
|
|
 |
|
|
Fukuda KD500 Charger 5.6v 900mA
from Laser Level's Online Shop |
|
|
|
|
 |
|
